Tile leveler is a kind of auxiliary worker used to improve the efficiency of tile laying.

1. The flat

Improve the flatness of ceramic tile paving and make the thickness of the adhesive layer uniform.

2. Well

Leave the seams even and consistent to ensure that the gap between each tile is the same size.

3. The fast

Reduces the process of adjusting the square in the construction, improves the construction efficiency, and the tiling speed is fast and beautiful. Large area paving saves more than 1/3 of the time.

Set 4.

Fixed tile to prevent tile from moving during the laying process.

Province of 5.

Ceramic tile back with matching tooth spatula, batch scraping out grain, relative to the traditional thick paste method in the ceramic tile back daub two or three cm of mortar approach, its construction process is more labor-saving, but also save space and material.

6. Easy

The operation is simple, and the novice can master it after one use.

Thrust plate leveling machine use: install leveling machine, edge USES spatula on ceramic tile, ceramic tile edges in the distance about 10 to 15 cm put leveling bottom seat, in leveling bottom of wedge was laid with forceps fixed leveling wedges and guiding rule check whether the shop is stuck level off, the demolition of leveling machine tap direction must be the same as that of brick joints, leveling device wedge can be recycled use.

Key Points for Attention in Construction

Ceramic tile side treatment:

Remember to complete the construction site, be sure to install the corner base;

Avoid the next day when construction, ceramic tile glue solidification, base installation is not.

Ceramic tile seam and buckle seam:

Ceramic tile seam width should be 3mm;

Cross positioning card embedded depth is not less than 2mm.

How to use tile leveler?

1. The tile leveler is stuck on the tile, which can improve the flatness after tiling. The selection of appropriate tile leveler is conducive to uniform and unified gaps between ceramic tiles, providing buffer space for thermal expansion and cold contraction of ceramic tiles, and avoiding the extrusion of ceramic tiles and edge collapse, or even the falling off of ceramic tiles.

2. Tile leveler, generally with buckle type, screw cover type, and this year's JCDecaux tile Open used tile leveler, is buckle type. The tile leveler is composed of three parts, a plastic base, inserts, and push pliers.

3. The plastic base is disposable, which is placed between two adjacent ceramic tiles, and is fixed and clamped by a matching insert and a pushing clamp. After the ceramic tile glue of the ceramic tile reverse side is dry solid and firm stickup, can knock off base upper part with rubber hammer can. The inserts are mainly used to fix the base and ceramic tiles, improve the flatness between ceramic tiles and prevent ceramic tiles from moving.

4. Push pliers are the tools that push the inserts and the base so that they are firmly fixed. In addition, it can be adjusted according to the push process.